Great, so I installed the black developer unit only to get error C which was the error code we were first called out for. Hopefully this is all it is so I will be returning armed with a power supply and a motor control PWB. I then resorted to basic power troubleshooting only to find no 24v or 12v coming from the power supply! If you dropped a screw and powered up the copier before finding it, that is a problem. After looking at your pic I can see that the screw was between two surface mount capacators and probably shorted the 24 volt or the 5 volt line. Kyocera TASKalfa ci errors!!
|Date Added:||12 July 2005|
|File Size:||7.44 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Whilst waiting for the maintenance kit, error C presented itself and believed it could be down to a faulty black charge roller. HI all I attended a Kyocera ci with error c last week however when I arrived, the error did not present itself.
It might be that the board is messing with your machine. Thanks all I returned and covered all my actions, checked all connectors and tested with no black dev and drum as they were new with no difference.
Great, so I installed the black developer unit only to get error C which was the error code we were first called out for. Any input on this would be of great help! Tags for cppystar Thread areabadblackcodeerrorkyocerapowerproblemsscreenwork.
I attended site with the maintenance kit A and installed the drum first, error C cleared! Kyocera TASKalfa ci errors!!
We had a machine that 5500ci the left door open, but switches, wire copysttar and boards were not the answer. I then resorted to basic power troubleshooting only to find no 24v or 12v coming from the power supply! Details vBulletin Mods by vBSocial. I have a bad feeling the main board is knackered?!!! The machine had done k so recommended the maintenance kit A to be replaced. Whilst in this area, I swapped the black cleaning motor with the yellow as I wanted to see if the error code would change.
If at first you don’t succeed, redefine success. Now when I power on the machine, the control panel backlight does not come on so its very hard to see the screen and it errors out on C which is a HDD error code!
Depemnding on where this supply is coystar will dictate what is damaged. Bookmarks Bookmarks Digg del. First thing you should do is check and then recheck all connections that you messed with.
Error Code Jam 80 Copystar CI
Results 1 to 5 of 5. If your display backlighting was working while the screw was there it copyatar still work. After two days with another tech our tech rep looking, they found a pinched wire on a system not connected to the door switch.
Your problem could be anywhere from the power supply, engine board to main board, but it just could be a connector in wrong.
Hopefully this is all copystra is so I will be returning armed with a power supply and a motor control PWB. I followed the bulletin to check the black cleaning motor etc and found a screw lodged behind the Motor Control PWB and the metal bracket it attaches to with burn marks around a resister on the PWB!
I would start by just replacing the motor control board and see if the problem goes away. The time now is After looking at your pic I can see that the screw was between two surface mount capacators and probably shorted the 24 volt or the 5 volt line.
I checked the drums and developer units and ran long tests with no problems. Get the Android App. If you dropped a screw and powered up the copier before finding it, that is a problem.