Release the Feed button while the LED blinks red and amber. Call Us Toll Free from the U. Page 39 View your labels in sequence on the Word display that appears. Loading Supply in the DuraLabel Lobo. Simply restart the computer to correct this. Figure 7 Align supply in the grooved section for easy movement.
|Date Added:||27 February 2010|
|File Size:||15.11 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Page 42 Replace the cutting mechanism, inserting the tabs on the sides of the cutter, dugalabel the slots as shown below. Apply the paper core to the ribbon rewind spindle, centering it using the measurement marks. The printer will do what it can, and then stop.
We can install your print driver and software, provide on—screen tutorials, and help you print your first label. Check the Supply Loading First, check to make sure that the ribbon is feeding properly through the system. Label Creation If you do not follow this step, you will need to create all labels from scratch.
Use one of our cleaning swabs, or a soft cloth with some isopropyl alcohol, to gently wipe the entire windowd surface of the print head, especially the area that is pressed down 030 the system is closed.
You can watch a video of the loading process to get started. The Duralabsl should be aligning itself to a gap or mark, but instead is only printing and cutting based on the label length.
Printer Support – Drivers, Manuals & More | Graphic Products
Then, set the Print Speed to 2 inches per second. Turn the ribbon rewind knob on the cartridge counter-clockwise a full rotation or so. The ribbon may not be feeding onto its take-up roll correctly, or the printer may simply pto following incorrect instructions.
Next, you’ll choose the sensor mode, to match the type of label stock you’re using. This may be windowe by an incompatible ribbon, or by incorrect instructions that Toro is trying to follow.
DuraLabel PRO Series
Select the appropriate port and click next. The printer is not seeing that mark or gap — possibly, not even looking for it. The roll of label stock should be centered on its spindle, and the material should unroll from the top of the roll.
Go to the Options tab, and look at the Printer Options section. Figure 15 Ribbon duralabbel 4.
I would like to receive emails to keep me safe! Enter text from picture: Double-click on the printer icon to open the Print Queueand look in the Printer menu in the top left for an option to Use Printer Offline. Page 18 The label supply should now be aligned over the media sensor. Getting Started with LabelForge.
If no click is heard, remove the 300 entirely, and make sure that there is no foreign material in the system or on the underside of the cartridge. Don’t show me this message again. Operate the manual cutter by pressing down firmly on the lighter-colored actuator.
DuraLabel PRO Information | Graphic Products
If you have the original DuraLabel bluethen remove the battery, press and hold the ESC key, and put the battery back in. Turn off the printer using the switch in the back, near the black power cord, and open the printer as if you were going to change all the supplies. The Darkness setting may be too high.
This option should be set to Thermal Transfer.
Graphic Products DuraLabel PRO 300 Free Driver Download
If you are still unable to get the cartridge in properly, please contact our support team for help. Merge to Printer window. If the problem continues without anything coming out of the printer, please contact our support team for help.
Support by Printer Find everything 3000 need. Open the printer lid and look at the label stock that is loaded, located in the right side of the system as you face the screen and keyboard.