Battery

LEAPFROG STEPPER DRIVER

Thank you for reading the solution and for any other issues please do not hesitate to contact our Leapfrog Support Team. For this you will have to remove the back panel of the printer and disconnect one motor at a time and use the Y jog control and see if one of the motors is not working: Sorry we couldn’t be helpful. Hello and thank you for choosing the Creatr HS for your printing needs. At the moment we are only offering support in English, so we kindly ask you to address your issue in English. If the connections are ok the next step is to check the motors.

Uploader: Dajora
Date Added: 5 September 2009
File Size: 35.6 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 78843
Price: Free* [*Free Regsitration Required]

So the two jumpers connectors have to be mounted this steppet Thank you for reading the solution and for any other issues please do not hesitate to contact our Leapfrog Support Team. The number 1 jumper on the first and second pin and the number 2 jumper on the second and third pins.

Leapfrog Nema 17 Stepper Motor C B&H Photo Video

Enter your search term here For this you will have to remove the back panel of the printer and disconnect one motor at a time and use the Y jog control and see if one of the motors is not working: Checking the stepper motors is quite easy and fast to do: Enter your search term here Or call our technical support: How can we help you today?

  FUJI XEROX DC3000 DRIVER

If one of your Y stepper motor is not working we would ask you to check the following: An easy way to see which motor does not work is to use the Y home command this way the motors will be blocked for about a minute. Sorry we couldn’t be helpful.

Help us improve this article leapdrog your feedback. Or call our technical support: Try moving the printhead on the X and Y axes and see if you can move the printhead; If you can it leapfgog the corresponding stepper motor is not working properly, in which case you will have to contact Leapfrog technical support in order to fix the printer. A stepper motor not working could be presented as the following issues: Hello and thank you for choosing the Creatr HS for your printing steoper.

Also make sure the connection that allows the motors to move in sync with each other is properly mounted marked with number 3 in the picture. We wish you happy printing!

If the connections are ok the next step is to check the motors.

Bolt – How to replace a printhead drive unit stepper motor? : Leapfrog customer support center

In the following solution you will be instructed on how to check stepepr function of the X and Y stepper motors on the Leapfrog Creatr 3D printer. Sorry we couldn’t be helpful. Hello and thank you for choosing the Leapfrog Creatr for your 3D printing needs. Help us improve this article with your feedback.

  BROTHER MFC-820CW SCANNER DRIVER

Did you find it helpful? How can we help you today? As you can see in the picture the jumpers circled have to be mounted in that position in leapfeog for both Y stepper motors to function properly Pic.

Thank you for reading the solution and for any other issues please do not hesitate to contact our Leapfrog Support Team. Staggered movement on the respective axis. At the moment we are only offering support in English, so we kindly ask you to address your issue in English.

Next use the home all command. Once this command is executed the printer stepper motors will lock up for 60 seconds and you should not be able to move the printhead on both the X and Y axes.

Leapfrog customer support center

Unresponsiveness to the jog controls. We wish you happy printing! At the moment we are only offering support in English, so we kindly ask you to address your issue in English. Shifted prints on the X or Y axis.